QTZ100(5613)
1. Max. Lifting capacity(t)8t
2. Max. Operating range(m)55m
3. Max. Lifting capacity at jib tip (t)1.6T
4. Basic height (m)45 m
5. Max. Height (m)150m
6. Dimension of section (m)1.835× 1.835× 2.5
7. Material of mast section 135× 135× 12/Q345B
| item | performance | parameters |
| 1 | Max. load(t) | 8t |
| 2 | Jib length(m) | 55m |
| 3 | Tip load(t) | 1.6t |
| 4 | Free standing height(m) | 50m |
| 5 | Max. height (m) | 151m |
| 6 | Mast section (m) | 1.835*1.835*2.5m |
| 7 | Material of mast section(mm) | 135*12 square tube |
2. Main parameters
| Rated load moment | kN.m | 800 |
| Max. load | t | 8 |
| Radius | m | 3~55 |
| Hoisting height | Independent | 50 |
| Attached | 151 |
| Hoisting speed | 2 falls | m/min | 80.4/41.0 |
| 4 falls | 39.4/20.1 |
| Slewing speed | r/min | 0.62 |
| Trolleying speed | m/min | 43.3/21.9 |
| Climbing speed | 0.4 |
| Min. descending speed | ≤7 |
| Outer size of the whole crane | Chasis | m | 8×8 |
| Height of crane | Independent | 55.892 |
| Attached | 160.892 |
| From jib end to slewing center | 54.17 |
| From balance arm to slewing center | 13.39 |
| Weight of crane | Weight of structure | Independent | t | 46 |
| Attached | 86 |
| Balanced weight | | 17.66 |
| Total motor capacity | kW | 41.52 |
| Allowable operating temperature | ºC | -26~+40 |
| Power parameter | 50Hz | ~380V±10% |
3. Technical parameter
| Loading rate of machine | Hoisting mechanism | M 5 |
| Slewing mechanism | M 4 |
| Trolleying mechanism | M 4 |
| Hoisting mechanism | Motor | Model | YZRDW225-4/8/ |
| Power(kW) | 30/30 |
| Height limiter | Type | FKDX-G |
| Steel wire rope | Type and specification | 6W19-12.5-1770-I |
| Max. pulling force(N) | 15000 |
| Maginification | a=2 | a=4 |
| Hoisting speed(m/min) | 80.4 | 41.0 | 39.4 | 20.1 |
| Rated load(t) | 1.3 | 4 | 2.6 | 8 |
| Min. descending speed | m/min | ≤7 |
| Slewing mechanism | Motor | Model | YZR132M 2 -6 |
| Power(kW) | 3.7×2 |
| Rotating speed(r/min) | 908 |
| Reducer | Type | XX 4 -100.180 |
| ratio | 180 |
| Hydraulic couplers | Type | YOX280A |
| Slewing pinions | Module m | 12 |
| Teeth z | 15 |
| Modification coefficient | +0.5 |
| Slewing speed | r/min | 0.62 |
| Slewing ring | ball like slewing ring of four point in a ling | Type | 011@45@1400 |
| Module m | 12 |
| Teeth z | 131 |
| Hydraulic jacking mechanism | Motor | Model | Y132M-4B5 |
| Power(kW) | 5.5 |
| Rated working pressure of oil pump | Mpa | 25 |
| Max. jacking force | t | 50 |
| Stroke of oil pump | mm | 1600 |
| Installation distance | mm | 2070 |
| Diameter of oil pump | mm | φ160 |
| Diameter of piston rod | mm | φ110 |
| Jacking speed | m/min | 0.4 |
| Trolleying mechanism | Motor | Model | YDEJ132S-4/8 |
| Power (kW) | 4.5/3 |
| Steel wire rope | specification | 6×19-7.7-1550- |
| Reducer | Type | BL22-43-3.3 |
| ratio | 43 |
| Trolleying speed | m/min | 43.3/21.9 |
Audited Supplier 
){kind=link}