The advantage as follows:
1. The using steel is Shanghai Baosteel. After test for qualified, then can use.
2. Painting Process. After shot-blast cleaning, spraying anti-rust paint, then spray paint.
3. Welding process use high-strength wire. Main joints use special steel and special process.
4. Electric device. Use international well-known manufacturers' electrical products, such as Schneider, Omron.
5. Motor, deceleration devices use domestic famous manufacturers' products
6. For cab, electrical device box, acid cleaning and parkerising, then painting, to ensure a long usage life.
7. Machine total weight is 3-5 tons heavier than the same type of tower crane in other manufacturers.
8. Each device is in strict test, then can packed to ship, to ensure that the trouble after leave the factory reduced to the minimum.
9. Reliable quality, advanced technology, favorable price, the best configuration, high safety factor, cost-effective --MINGWEI products is trust worthy, we can ensure the customers buy the products assured and use happy.
Tower Crane Model:QTZ100(TC6010)
Free Standing Height/Max. Height:45m/150m
Jib Length : 3---60m
Mast Section/Material:Square Tube 135×135×12/Q345B
Size of Mast Section, L×W×H:1835×1835×2500
Collar Ties Situation: Distance between first collar tie and the ground 35000mm
Other Distance 25000mm
Suspension Height no more than 25m
Balanced Weight /Jib Length: 16.32t/55m
Total Power: 46.2Kw
Basic Parameters:
Mechanical Factor |
Hoisting Mechanism |
M5 |
Slewing Mechanism |
M4 |
Trolleying Mechanism |
M4 |
Hoisting Mechanism |
Motor |
Model |
YZRDW250M1-4/8 |
Power(kW) |
30/30 |
Height Limiter |
Model |
FKDX-G |
Wire Steel Rope
|
Specification |
6X37-15-1770-I |
Max. Attraction(N) |
20000 |
Falls |
a=2 |
a=4 |
Lifting Speed (m/min) |
80.36 |
41.05 |
39.37 |
20.11 |
Rated Load (t) |
2 |
4 |
4 |
8 |
Min. Rate of Descent |
m/min |
≤7 |
Slewing Mechanism |
Motor |
Model |
YZR132M2-6 |
Power(kW) |
3.7×2 |
Rotating Speed(r/min) |
908 |
Reducer |
Model |
XX4-100.180 |
Drive Ratio |
180 |
Coupler |
Model |
YOX280A |
Rotating Pinion |
Modulus m |
12 |
Number of Teeth z |
16 |
Modification coefficient |
+0.5 |
Rotating Speed |
r/min |
0.64 |
()
Slewing Bearing |
Single row four-point contact ball slewing bearing |
Model |
011·45·1400 |
Modulus m |
12 |
Number of Teeth z |
131 |
Hydraulic Jacking Mechanism |
Motor |
Model |
Y132M-4B5 |
Power(kW) |
5.5 |
Rated Oil Cylinder Working Pressure |
Mpa |
25 |
Max. Jacking Force |
t |
50 |
Oil Cylinder Stroke |
mm |
1600 |
Locating Distance |
mm |
2070 |
Oil Cylinder Diameter |
mm |
φ160 |
Oil Cylinder Piston Diameter |
mm |
φ110 |
Jacking Speed |
m/min |
0.4 |
Trolleying Mechanism |
Motor |
Model |
YDEJ132S-4/8 |
Power(kW) |
4.5/3 |
Wire Steel Rope |
Spec. |
6×19-7.7-1550 |
Reducer |
Model |
BL22-43-3.3 |
Drive Ratio |
43 |
Trolleying Speed |
m/min |
44/22 |