QTZ63 construction tower crane is one of the key product of MINGWEI company, which has good quality and competitive prices
1) The crane adopts standard section hydraulic lifting and connecting, and can decide the crane height according to the actual height of the building, and at the same time, the lifting capacity will not be affected.
2) It has high working speed, good speed-adjusting performance, steady operation and high efficiency. Three-speed motor and mono-speed ratio decelerator are applied in the lifting structure, which enables heavy load low speed and light load high speed.
3) Wide work range and applicable objects. Through replacing, adding and removing some parts and supplementary devicesm the crane can get two working styles: independent and attached, so as to satisfy different requirements. The max. lifting height of attached style is as high as 150m.
4) The machine has complete set of safety devices, which can guarantee the safe and high efficient operation of the equipment. The crane equipped with lifting height limiter, dolly range-change limiter, moment limiter, weight limier and circumgyrating limiter, etc.
5) The crane has scientific layout and beautiful appearance. The operator's room is set independently on one side, with good vision field, it creates a good working environment for the operator.Tower Crane Model:ToplessQTZ63(PT5610)
Free Standing Height/Max. Height:40m/150m
Jib Length : 3---56m
Mast Section/Material: Square Tube 135×135×12/Q345B
Size of Mast Section, L×W×H: 1800×1800×2800
Collar Ties Situation: Distance between first collar tie and the ground 35000mm
Other Distance 25000mm
Suspension Height no more than 25m
Balanced Weight /Jib Length: 11.4t/56m;10.95t/54m;9.9t/48m;8.85t/42m;7.8t/36m
Total Power: 40.2Kw
Loading Chart:
Basic Parameters:
Mechanical Factor | Hoisting Mechanism | M5 |
| Slewing Mechanism | M4 |
| Trolleying Mechanism | M4 |
| Hoisting Mechanism | Motor | Model | YZTD2-2/4/16 |
| Power(kW) | 24/24/5.4 |
| Height Limiter | Model | FKDX-G |
| Wire Steel Rope | Specification | 6X19-12.5-1770-I |
| Falls | a=2 | a=4 |
| Lifting Speed (m/min) | 74 | 38 | 38 | 20 |
| Rated Load (t) | 1.5 | 3 | 3 | 6 |
| Min. Rate of Descent | m/min | ≤7 |
| Slewing Mechanism | Motor | Model | YZR132M1-6 |
| Power(kW) | 3.7×2 |
| Rotating Speed(r/min) | 908 |
| Reducer | Model | XX4-100.180 |
| Drive Ratio | 180 |
| Coupler | Model | YOX250A |
| Rotating Pinion | Modulus m | 12 |
| Number of Teeth z | 15 |
| Modification coefficient | +0.5 |
| Rotating Speed | r/min | 0.63 |
| Slewing Bearing | Single row four-point contact ball slewing bearing | Model | 011·45·1250 |
| Modulus m | 12 |
| Number of Teeth z | 118 |
(Continued)
| Hydraulic Jacking Mechanism | Motor | Model | Y132M-4B5 |
| Power(kW) | 5.5 |
| Rated Oil Cylinder Working Pressure | Mpa | 25 |
| Max. Jacking Force | t | 50 |
| Oil Cylinder Stroke | mm | 1600 |
| Locating Distance | mm | 2070 |
| Oil Cylinder Diameter | mm | φ160 |
| Oil Cylinder Piston Diameter | mm | φ110 |
| Jacking Speed | m/min | 0.4 |
| Trolleying Mechanism | Motor | Model | YEZS112M-4/8 |
| Power(kW) | 3.3/2.2 |
| Wire Steel Rope | Spec. | 6×19-7.7-1550 |
| Reducer | Model | XX2-12-38 |
| Drive Ratio | 38 |
| Trolleying Speed | m/min | 40/22 |
Audited Supplier 
){kind=link}